1What is the magnetic effect of electric current?
Solution:
When electric current flows through a conductor (like a wire), it produces a magnetic field around it.
This can be detected by deflecting a nearby magnetic compass needle; when the current stops, the needle returns to its original position.
This phenomenon is known as the magnetic effect of electric current, and was discovered by Hans Christian Oersted in 1820.
2What is an electromagnet? How can its strength be increased?
Solution:
A current-carrying coil that behaves as a magnet is called an electromagnet; it usually has an iron core to make it stronger.
Its strength increases with a larger current (more cells) or a greater number of turns of the coil.
Its magnetic field disappears when the current is switched off, and its poles can be reversed by reversing the direction of the current.
3What are electromagnets used for?
Solution:
Electromagnets are used in devices such as electric bells, motors, fans, loudspeakers, and lifting magnets (cranes).
Lifting electromagnets in cranes and scrap yards lift and release heavy iron/steel objects by switching the current ON and OFF.
They are useful because they can be switched on and off and their strength can be controlled.
4What is the heating effect of electric current?
Solution:
When electric current flows through a conductor, it faces resistance, which converts some electrical energy into heat energy, so the conductor gets heated.
This is called the heating effect of electric current; the heat depends on the current, and on the material, thickness and length of the wire.
Nichrome wire offers higher resistance than copper and is used in heating appliances.
5Give examples of appliances that work on the heating effect.
Solution:
Electric room heaters, electric stoves, electric kettles, electric irons, water heating immersion rods, and hair dryers.
An incandescent lamp glows because its filament is heated by the current.
These devices contain a heating element (a rod or coil of wire, often nichrome) that becomes red hot.
6What is a Voltaic (Galvanic) cell?
Solution:
A Voltaic cell contains two metal rods (electrodes) of different materials dipped in an electrolyte (a weak acid or salt solution).
A chemical reaction between the electrodes and electrolyte produces electricity; current flows from the positive to the negative terminal.
When the chemicals are used up, the cell is 'dead'. It is named after Alessandro Volta and Luigi Galvani.
7What is the difference between a dry cell and a rechargeable battery?
Solution:
A dry cell uses a thick moist paste as electrolyte (zinc container as negative terminal and a carbon rod as positive terminal) and is single-use.
A rechargeable battery can be recharged and reused many times, saving money and reducing waste.
Lithium-ion batteries are the most common rechargeable type today, but they also wear out after many charge cycles.