Chapter 4: Electricity: Magnetic and Heating Effects Key Concepts, Notes & Summary - NCERT Class 8 (Curiosity)
Magnetic Effect of Electric Current
A current-carrying wire produces a magnetic field around it (magnetic effect of electric current), discovered by Oersted (1820).
It is detected by the deflection of a nearby magnetic compass needle; the deflection disappears when the current stops.
A current-carrying coil that behaves as a magnet is an electromagnet (usually with an iron core to make it stronger).
Strength increases with more current and more turns; poles reverse when current direction is reversed; field disappears when switched off.
Applications: electromagnets, electric bells, motors, fans, loudspeakers, and lifting magnets (cranes).
Heating Effect of Electric Current
When current flows through a conductor, resistance converts electrical energy into heat - the heating effect of electric current.
Heat depends on current, and on the material, thickness and length of the wire.
Nichrome (high resistance) is used in heating elements of irons, kettles, heaters, stoves, immersion rods and hair dryers.
An incandescent lamp's filament glows due to this heating effect.
Overheating can damage plugs/sockets and cause fires; proper wires, fuses and ratings ensure safety.
Cells and Batteries
A cell/battery generates electricity through chemical reactions inside it.
Voltaic (Galvanic) cell: two different metal electrodes dipped in an electrolyte (acid/salt solution); named after Volta and Galvani.
In a Voltaic cell, current flows from the positive terminal through the circuit to the negative terminal; the cell is 'dead' when chemicals are used up.
Dry cell: electrolyte is a moist paste; zinc container is the negative terminal and carbon rod is the positive terminal; single-use.
Rechargeable batteries (e.g. lithium-ion) can be reused many times, but wear out eventually; recycling reduces environmental harm.